Seas Excel W12CY003 E0044-08S

Nextel coated paper and chassis
Beschikbaarheid:: Niet op voorraad: indien weer op voorraad, zal deze in een keer uit voorraad worden verzonden
Artikelnummer voorraad referentie: 1381711
Leveringsdatum: 1 - 3 werkdagen
Fabrikant: Seas Excel
€198,31 incl. BTW
Exclusief verzenden

A paper cone with a unique Nextel coating ensures smooth frequency response and low distortion.

Heavy copper rings mounted above and below the T-shaped pole piece reduce non linear and modulation distortion and increase overload margin.
A large magnet system provides good sensitivity and transient response.

A chrome plated brass phase plug reduces compression due to temperature variations in the voice coil, increases long term power handling capacity and eliminates resonances in the cavity inside the voice coil former.
An extremely stiff and stable injection moulded nextel coated metal basket keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflexion, air flow noise and cavity resonance to a minimum.


Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF



Specs

Electrical Data

  • Nominal Impedance
Zn 8 ohm
  • Voice Coil Resistance
Re 5.5 ohm
  • Voice Coil Inductance
Le 0.41 mH

TS Parameters

  • Free Air Resonance
Fs 60 Hz
  • Force Factor
Bl 5.5 N/A
  • Moving Mass
Mms 6.1 g
  • Effective Piston Area
Sd 50 cm^2
  • VAS
4 Litres
  • Qms
2.30
  • Qes
0.44
  • Qts
0.36

Power Handling

  • Long-term Power handling
IEC 268-5 70 W
  • Short-term Power handling
EC 268-5 200 W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter
26 mm
  • Voice Coil Height
12 mm
  • Height of the Gap
6 mm
  • Linear coil Travel (p-p)
6 mm
  • Magnetic Gap Flux Density
1.1 T
  • Weight of Magnet
0.42 kg
  • Total Weight
1.30 Kg

Misc

  • Recommended Frequency Range
60 -3500 Hz


Frequency
Frequency


Mechanical Dimensions

Mechanical Dimensions


A paper cone with a unique Nextel coating ensures smooth frequency response and low distortion.

Heavy copper rings mounted above and below the T-shaped pole piece reduce non linear and modulation distortion and increase overload margin.
A large magnet system provides good sensitivity and transient response.

A chrome plated brass phase plug reduces compression due to temperature variations in the voice coil, increases long term power handling capacity and eliminates resonances in the cavity inside the voice coil former.
An extremely stiff and stable injection moulded nextel coated metal basket keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflexion, air flow noise and cavity resonance to a minimum.


Als u deze gegevens liever wilt uitprinten of voor offline gebruik, download dan onze PDF
Product Informatie PDF



Specs

Electrical Data

  • Nominal Impedance
Zn 8 ohm
  • Voice Coil Resistance
Re 5.5 ohm
  • Voice Coil Inductance
Le 0.41 mH

TS Parameters

  • Free Air Resonance
Fs 60 Hz
  • Force Factor
Bl 5.5 N/A
  • Moving Mass
Mms 6.1 g
  • Effective Piston Area
Sd 50 cm^2
  • VAS
4 Litres
  • Qms
2.30
  • Qes
0.44
  • Qts
0.36

Power Handling

  • Long-term Power handling
IEC 268-5 70 W
  • Short-term Power handling
EC 268-5 200 W

Voice Coil and Magnet Parameters

  • Voice Coil Diameter
26 mm
  • Voice Coil Height
12 mm
  • Height of the Gap
6 mm
  • Linear coil Travel (p-p)
6 mm
  • Magnetic Gap Flux Density
1.1 T
  • Weight of Magnet
0.42 kg
  • Total Weight
1.30 Kg

Misc

  • Recommended Frequency Range
60 -3500 Hz


Frequency
Frequency


Mechanical Dimensions

Mechanical Dimensions


Schrijf uw eigen beoordeling
  • Product kan alleen worden beoordeeld nadat het is gekocht
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
*
*
Slecht
Uitstekend
Product beoordelingen
Alleen geregistreerde gebruikers kunnen een beoordeling schrijven